It’s late summer and the heat wave killed the grass on your lawn, so what better to do than challenge Bob Cleveland’s record for the fastest lawn mower yet? Not sure your mower has what it’ll take to race down the salt flats at over 80 MPH? Wimp.
Utah’s KSL TV quotes Bob saying ?we don’t need a whole lot of horsepower to go fast.? And when you look at the tiny wheels on that thing, well, you’ve gotta imagine you can do better.
29 Comments
80 Mph?! BULL!
[tags]BULL[/tags]
got it beat by a long shot lawndragster13.tripod.com
it takes a lot of guts for this sort of speed
guts ….. and this isn’t with a motor … just following one
ok i have an old torro ridin lawn mower and im lookin to make it go fast for as cheap as possible, could you please tell me how to make it go fast for as cheap as possible!!!!!!!!!!!!!!!HEL{P ME
80 MPH IS GARBAGE I CAN GO 150!!! (hints a motorcycle ingine
Put a snow machine engine in it then talkto me.
What size of moter did you use?
just went to the 1/4 mile drags turned 17.58 at 76.71mph on a murry lawn mower comin after that fastest lawn mower title Bob
I’ve never seen this before but right now Im in the process of fitting a 110hp 617cc twin l/c sled engine into my riding mower, really limited on space but cant wait till its finished!
We are going to shatter your bitch ass record you pussy.
fuck you thats slow were gunna blow u out of the water we got a cr 500 the does about 180 so your fucked your gunna lose your fast speed record
fuck you
If your using a bike or snowmobile engine, then its not a lawn mower. I think to break the record you would have to use a lawn mower engine (like something that actually came in a mower to mow your lawn with). Just my 2 cents worth.
I have raced mowers for three years and that is going 50mph on a 1/12th mile track with a 8hp briggs n’straton engine and a stock mower rear end. To get speed all you need to do is get the right pullies like a 7:3 ratio will push you to 55-60 no problem (thats a 7inch front to a 3inch rear). a 7:2 or 8:1 would probable get you to 80-90mph. for some real fun contact me a kennethg089@yahoo.com and leave me a message and i will try to answer any questions you have FREE OF CHARGE. this is to see how fast we can ge a MOSTLY STOCK LAWN MOWER. if you want to put stupid shit on it like a booster bottle or nos or a gocart tramsmission then it is up to you.
we had our old murry 95 mph with a old 18
hp briggs
Hey i have a yard machine i got my friend had..I want to make it faster but how.. I took the deck off and painted it and put an underglow on it.. it has an 11 and a half hp motor with 6 gears it shifts on go right now stock it go about 9 i wan it to go at least 15 and top of 35 if you have any tips email me at austondakota@aol.com
on my serries 2000 lawn mower i put go kart hubs on the rear 3 on 3 pattern and kart racing slicks all the way round its got a 2 inch on the rear and soon to be 7 on the motor it should scoot around pretty good!!!!
I HAVE A 18HP B&S TWINCYLINDER,
L-HEAD ENGINE.
I WANTED TO KNOW IF THERE IS A PLACE YOU CAN BUY ANY RACING PARTS FOR THAT
TWINCYLINDER ENGINE.
THANK’S JIM SHIPLEY
well i can see that thats fast and all.. but if ya want to go fast 1 to 1 ratio and big tires
HELP!!!!! i am building a half gocart/half mower. i have a tecumseh 700 trans and want to go atleast 40 mph but dont know how. can the gears inside be changed? help me
i’ve got a 292 yamaha snowmobile engine and i want to put it on an old lawn chief. how do i do it?
the whole frame is stripped. i’ve had an axle machined. but i’ve ran into problems.The axle is solid and i don’t know what the steerin is gonna be like. any suggestions?
poo
HELP ME PLEASE
ok ive got a murry somthing and its got 12hp i want to make it like a go cart / mower with out the blade though please help me make it go fast at least over 10 MPH if any tips email me at fatmonkeylover281@yahoo.com thanks
if yall want to go faster change the pully ratio down under
what kind of rear end do u recomend using besides my stock one with a 6 speed, i want to go to a chain drive, what would be the best for a rear axle there, go cart or what
We are in the process of building a land speed record lawnmower, using a Cub Cadet transaxle and a V-twin Kohler. Right now on a 300′ pulling track and dragging a 10,000 lb weight transfer sled we are having ground speed (track speed) of 30 mph with a 50 mph gear, I think with a little regearing we should easily get there and we don’t use pulleys, that’s a pityful way to do it, we just use stock gearing now that’s a lawnmower to do it with stock gearing.
Post a Comment